22

2.Primer - Pump Bulb.

Pump primer bulb until fuel is visible in the "Clear" fuel return line.

B

SHC-1700, 2100

3A. Starting -(SCH-1700,2100,2400)

Lay trimmer on a flat, clear area and pull starter handle/rope (D) until engine fires.

3B. Starting (HCA-2400)

Lay the hedge clipper on a flat, clear area. With left hand, firmly grasp and hold the "Ignition/Idle Interlock" lever and throttle trigger in wide open position. Rapidly pull starter handle/rope (D) until engine fires.

NOTE

HCA-2400 "Ignition/Idle Interlock" must be held tight against the grip or the engine will stop at idle.

C

 

SHC-2400

 

D

HCA-2400

 

 

B

C

D

STOPPING ENGINE (SHC UNITS)

1.Release Throttle. Allow engine to idle down and blades stop moving with throttle trigger disengaged.

2.Stop Switch - STOP. Move ignition switch button backward to STOP position.

WARNING DANGER

If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using hedge clipper again or serious personal injury may result.