HEDGE CLIPPER 25

OPERATOR'S MANUAL

AIR FILTERLevel1.

Tools required: Cleaning brush, 1" or 2" medium bristle paint brush.

Partsrequired:(SHC-1700/2100)90008REPOWERTMAIR&

FUELFILTERKIT. (SHC-2400/HCA-2400)90030REPOWERTMAIR&

FUELFILTERKIT.

1.Close choke (Cold Start Position). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumu- lated dirt from the air cleaner area.

2.Remove the air cleaner cover. Clean and inspect the element for damage. If element is fuel soaked and very dirty, replace.

3.If element can be cleaned and reused, be certain it:

•properly fits the cavity in the air cleaner cover.

•is installed with the original side out.

NOTE

Carburetor adjustment may be needed after air filter cleaning/ replacement. See Carburetor Adjustment Section.

FUEL FILTER

Level1.

Toolsrequired: Fuellinehook.8"-10"(203-254mm)lengthofwirewithone end bent into a hook. Clean rag, funnel, and an approved fuel container.

Parts Required: (SHC-1700/2100)90008REPOWERAIR&

FUELFILTERKIT. (SHC-2400/HCA-2400)90030REPOWERAIR&

FUELFILTERKIT.

WARNING DANGER

Fuel isVERYflammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

1.Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank.

2.Use the “fuel line hook” to pull the fuel line and filter from the tank.

3.Remove the filter from the line and install the new filter.