HEDGE CLIPPER | 5 |
OPERATOR'S MANUAL |
Symbol form/shape | Symbol | Symbol form/shape | Symbol |
| description/application |
| description/application |
|
|
|
|
| Read and understand |
| Fuel and oil mixture |
| Operator's Manual. |
| |
|
|
| |
|
|
|
|
| Wear eyes, ears and |
| Finger Severing |
| head protection |
|
|
|
|
|
|
|
|
| Wear hand |
|
|
| protection. Use |
|
|
| two handed. |
|
|
|
|
|
|
| DO NOT smoke |
| Hot |
| near fuel. |
| Surface |
|
|
|
|
|
|
| Safety/Alert |
| DO NOT allow |
|
|
| flames or sparks |
|
|
| near fuel. |
|
|
|
|
| Avoid all power lines. |
| Do not operate clos- |
| This unit is not insulat- |
| er than 15 M (50 ft.) |
| ed against electrical |
| from electrical |
| current. |
| hazards. |
|
|
|
|
Symbol form/shape |
| Symbol | Symbol form/shape | Symbol |
| description/application |
| description/application | |
|
|
|
|
|
| Keep bystanders at |
| Plan retreat path | |
|
| from falling | ||
| least | 15 meters |
| |
|
| objects. | ||
| (50 feet) away. |
| ||
|
|
| ||
|
|
|
|
|
| Emergency stop |
| Wear slip resistant | |
|
| foot wear. | ||
|
|
|
|
|
| Engine choke |
| Ignition | |
|
| ON/OFF | ||
|
| control. |
| |
|
|
|
| |
|
|
|
|
|
|
|
|
| Carburetor adjustment |
| Primer bulb |
| - High speed mixture | |
|
|
| ||
|
|
|
|
|
| Carburetor adjustment |
| Carburetor adjustment | |
|
| - Idle speed | ||
| - Low speed mixture |
| ||
|
|
| ||
|
|
|
|
|
Before operation a complete check of the unit must be performed;
•Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.
•Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found.
•Inspect hand guard for damage. Replace if damaged or missing.
•Check that the blade assembly is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used.
•Check that front loop handle and shoulder strap/ or shoulder/ waist harness are adjusted for safe, comfortable operation.
•Tighten the blade angle adjustment lever before operating the
IMPORTANT
Always store and transport Shaft Hedge Clipper in a stable, horizontal position. Support gear case and cutting blades to prevent excessive flexing, which may cause damage to the cutting attach- ment.