Eclipse - Fujitsu Ten CD3424 owner manual Enabling the loudness control, XO-NF NON-FADER Mode

Basic operation

[AUDIO CONTROL] button

XO-NF (NON-FADER) Mode

Here, the LPF (low-pass filter) to the non-fader pre-out can be switched ON and OFF.

Since the low-pass filter passes only lower ranges (higher ranges are cut off), efficient playback is enabled by cutting off mid to higher range elements not needed for a woofer.

Turn the [AUDIO CONTROL] button to the left or right switch Cross Over (NF) ON/OFF.

NF-PH (NON-FADER PHASE) Mode

The merging of sound between the front and rear speakers and the woofer can be improved by selecting the phase.

Switch the phase to a phase which lets the speakers combine without any disharmony.

Turn the [AUDIO CONTROL] button to select NORMAL or

REVERSE.

NORM: Normal phase

REV : Reverse phase

Enabling the loudness control

The loudness control may be turned on to emphasize low and high frequencies at low volume levels.

Loudness compensates for the apparent weakness of low and high frequencies at low volume by boosting the bass and treble levels.

1	Press and hold the [AUDIO CONTROL] button until the
	[LOUD ON] display appears on the screen.

To disable the loudness feature, repeat the above procedure to ATTENTION display the [LOUD OFF] indication.

27