Basic operation
[FM AM] button | Buttons [1] to [6] | [SEEK | ] button |
| |||
|
|
| [SEL] |
|
|
| button |
[AUDIO CONTROL] button |
| [FAST | ] button |
Listening to the tuner
1 | Press the [FM AM] button. |
| This will turn the tuner on. |
2 | Press the [FM AM] button to switch to the desired FM or |
| AM bands. |
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed.
3 | Turn the [SEL] button to the left or right to tune to a |
| station. |
Turn to the right: Turnes to higher frequencies.
Turn to the left: Turnes to lower frequencies.
4 | Press the [SEEK /FAST ] button to start the automatic |
| station search. |
[SEEK 
] button: Starts searching toward higher frequencies.
[FAST 
] button: Starts searching toward lower frequencies
If stations have been stored in memory, pressing a button ATTENTION from [1] to [6] will directly select a station. (Refer to the section
“Manually setting stations into memory” on page 43)
Adjusting audio volume
1 Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases the volume.
Turn to the left: Decreases the volume.
Do not adjust the volume or other controls while driving the Warning vehicle. Do so only while parked in a safe location.
24
