How to operate the tuner
Buttons [1] to [6]
[SEL] |
button |
[FM AM] button
Entering stations into memory automatically (The automatic preset mode: ASM)
1 Press the [FM AM] button to switch to the desired FM or AM bands.
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed.
2 | Press the [SEL] button for more than two seconds until a |
| beep is heard. |
The automatic preset mode starts.
The [ASM ON] indicator on the screen flashes, and stations are automatically entered in memory under buttons [1] to [6]. These buttons are called preset buttons.
•Press any numbered button to select the station whose
ATTENTION frequency is indicated right above the button.
•When a new station is set in memory, the station previously set in memory will be deleted.
•If there are fewer than six receivable stations, the stations set in the remaining buttons will be retained.
42
