EDGE Tech Edge 540 - page 10

EDGE 540. Instruction Manual.
10
Battery.
4mm X 20mm.
1) Using a modeling knife, carefully cut
off the rear portion of one of the 3 nylon tubes
leaving 1/2” protruding from the rear of the
stopper. This will be the fuel pick up tube.
INSTALLING THE STOPPER ASSEMBLY.
FUEL TANK.
INSTALLING THE BATTERY.
ENGINE MOUNT.
Repeat the procedure for the other
aileron servo.
See pictures below:
C/A glue.
2) Using a modeling knife, cut one length
of silicon fuel line. Connect one end of the line
to the weighted fuel pick up and the other end
to the nylon pick up tube.
3) Carefully bend the second nylon tube
up at a 45º angle. This tube is the vent tube.