EDGE Tech Edge 540 specs

EDGE 540.

Instruction Manual.

2)Follow diagram below for wheel pant installation:

(2)Washer.

Wheel Collar.

Axle.Nut.

(2) Wheel Collar.	(2) Washer.
(2) Wheel Collar.
Axle.	Nut.
Wheel.	Nut.
	Nut.

Wheel.

Nut.

Landing Gear.

Wheel Pant.

Landing gear.

10mm.

3)You have to trim each axle using a toll cutting and cut-off wheel.

Caution when cutting the axles and wear protective goggles.

46mm.

13

Image 13

EDGE Tech Edge 540 specifications Follow diagram below for wheel pant installation

Contents

Edge Introduction Parts ListingAdditional Items Required Tools & Supplies Needed Edge Hinging the Ailerons Hinging the Elevators Hinging the Rudder Installing the Aileron Servos Aileron Linkage Servo arm Engine Mount Installing the BatteryFuel Tank Mounting the Engine Wheel and Wheel Pants Follow diagram below for wheel pant installation Cowling Installing the Main Landing Gear Installing the Spinner Horizontal Stabilizer Elevator Rudder Servo Installation Vertical Stabilizer Installation Control Horn Installation ELEVATOR-RUDDER Pushrod Installation Mounting the Tail Wheel Bracket Installing Tail Strut SystemMounting the Control Clasp Installing the Fuselage Servo Installing the SwitchThrottle Servo Installation Installing the Receiver Balancing Attachment WING-FUSELAGEControl Throws Preflight Check Flight Preparation Edge Edge