EDGE Tech Edge 540 - page 19

EDGE 540. Instruction Manual.
19
 2) Position the elevator horn on the both
side of elevator. The clevis attach- ment holes
should be positioned over the hinge line.
Control Horn.
Mounting Screws. Mounting Plate.
 3) Using a 1.5mm drill bit and the control
horns as a guide, drill the mounting holes
through the elevator halves.
 4) Mount the control horns by inserting the
bolts through the control horn bases and
elevator halves, then into the mounting
backplates. Do not overtighten the nuts or the
backplates may crush the wood.
 5) Position the rudder control horn on the
left side of the airplane. Mount the control horn
parallel with the horizontal stabilizer.
 6) Install the rudder control horn using the
same method as with the elevator control
horns.
Elevator - rudder pushrods assembly follow
pictures below.
ELEVATOR-RUDDER PUSHROD
INSTALLATION.
2mm x 20 mm.
11.8cm.
Rudder pushrod.
Elevator pushrod.
10.8cm.
Elevator control horn.
C/A glue.
Left side.
Elevator control horn.
Rudder control horn.