Chapter 2 Setting Up Your Printer
Installing the Optical Photoconductor (OPC) Belt Cartridge
Caution! Do not touch or wipe off any powder that is on the OPC belt, or expose the OPC belt to light.
1. Open the top and front covers.
2. Lift the green OPC belt cartridge lock levers up until they unlock, with the channels upright.
3. With the top cover open, remove
the protective sheet from the OPC belt cartridge.
4. Remove the two shipping pins from the OPC belt cartridge.
5. Hold the OPC belt by the handle at the top. Ensure that the white gear is on the right hand side as viewed from the front of the printer. Slide the OPC belt car- tridge downward along the green
15
