Chapter 8 Options and Accessories
8.Slide the controller board back into the printer and reinstall the screws.
9.Connect the power cord and the interface cable to the printer.
TEST00 | 10. Turn on the printer and ensure that |
DRAM RW $$M | during the |
| play shows the new memory in the |
| |
| DRAM tests. If the memory indi- |
| cated is incorrect, reinstall the |
| memory module. |
| $$ is a running count of bytes |
| tested (1M, 2M, 4M, 8M, 16M, |
| 32M, 64M, 96M). |
Note: The amount of memory installed is shown on the bottom row of the display immediately after
85
