Tally T8006e Color Laser Printers User Guide
Setting the Fuser Cleaning Roller Counter to Zero
Printer software tracks fuser cleaner roller usage. After the counter reaches a
Whenever replacing the fuser cleaning roller the counter has to be set to zero as detailed below.
| 1. | Take the printer off line, by pressing the | |
|
| ONLINE key. Press and hold the | |
|
| MENU/ENTER/ | . The printer |
|
| shows test mode, keep pressing the | |
|
| menu key until printer says utility menu. | |
|
| Release the menu key and press it once. | |
| 2. | Printer shows utility Menu clear FC | |
|
| roller. |
|
| 3. | Press MENU/ENTER/ . The dis- | |
|
| play will show Clear FC. Roll Not | |
|
| Execute. |
|
| 4. | Press either TRAY/ | or MEDIA/ |
|
| until the display shows Clear FC. Roll | |
|
| Execute. |
|
5. | Press MENU/ENTER/ once, and after approximately 10 seconds, | ||
| the display will show Completed Clear FC. Roll. |
| |
6. | Press the key three times to exit the utility menu and then press the | ||
| online key. Or turn the printer off. |
| |
NoteFor more information about displayed error messages, see “Appendix D Control Panel Messages” on page 147.
14
