Tally Genicom T8006e manual 102

Tally T8006e Color Laser Printers User Guide

Slow or No Printing	Possible Cause	Correction
The printer does not print.	The printer is offline (the	Press the ONLINE button
Print process has stopped	ONLINE lamp is off).	(the ONLINE lamp will light
and/or has stopped		when the printer is online).
responding.
	An incompatible printer driver	Load the correct printer driver
Intermittent printing.
	is being used.	(page 23).
Symbols are printed.
(Continued on next page.)	The source print data has been	Restore print data and/or
	deleted from the network dur-	printing program, and repeat
	ing printing, and/or user soft-	printing.
	ware has stopped responding.
	If a file size is too large (mega-	Reduce the file size by break-
	bytes), the printer or the user’s	ing the file into smaller print
	computer may go into a time-	jobs. Postpone the timeout or
	out period or a sleep mode	sleep mode of the user’s com-
	before all data has been trans-	puter (page 125).
	ferred and spooled.
	The image and/or file is too	Reduce the file size by break-
	large (megabytes) for available	ing the file into smaller print
	disk space.	jobs, or provide more disk
		space.
	Power surge, poor interface	Connect the printer properly.
	connection, network prob-	Make sure that the software,
	lems.	network, and operating envi-
		ronment is compatible for the
		printer.
	The port selection and the pri-	Correct the settings on the
	oritized port settings prevent	printer control panel for the
	the printer from using the par-	port selection and the priori-
	allel port.	tized port (page 125).
	The operating mode for the	Select the correct operating.
	parallel port does not match	mode for the parallel port
	the printer operating mode.	(page 132).
	The printer may not be cor-	Print a network configuration
	rectly or properly connected to	Page (page 122) and check it.
	your network.
	If a data size of a page is too	Reduce the data size of the
	Large, the printer max not	page.
	duplex print even specified.

102