Tally T8006e Color Laser Printers User Guide
Poor Print Quality
Poor print quality may be due to various causes. Proceed to the following
Caution! Do not disassemble the printer for further troubleshooting and/ or repair. If the problem is not found and corrected after following these troubleshooting steps, contact a Tally Service Technician.
Poor Print Quality | Possible Cause | Correction | |
|
|
| |
Characters and lines are | The printer is set to print at | Set the printer to | |
faint. | Standard or Draft Mode. | Mode. | |
Graphics are partially |
|
| |
The printer is set for Toner | Turn off the Toner Save | ||
blank and/or have light | |||
Save. | (page 51). | ||
striping. | |||
Characters and graphics |
|
| |
The Density Adjustment is set | Adjust the Density Adjust- | ||
printed on labels or thick | |||
too light. | ment to the darker setting | ||
paper peel off. | |||
| (page 54). | ||
Characters and graphics |
| ||
|
| ||
printed on plain paper are | The wrong paper type is speci- | Specify the correct paper type. | |
too glossy. | fied. |
| |
Characters and graphics |
|
| |
The paper is incompatible for | Reload the paper tray with the | ||
printed on transparencies | |||
are too light or dark when | printing. | correct paper type. | |
projected. |
|
| |
The paper is too old and/or is | Reload the paper tray with | ||
| |||
| extremely dry. | fresh paper. | |
|
|
| |
| Multiple sheets of paper over- | Make sure multiple pages are | |
| lap while printing one sheet. | not jammed within the printer. | |
|
|
| |
| The toner is depleted. | Replace the toner cartridge(s) | |
|
| (page 61). | |
|
|
| |
| The OPC belt charging wire is | Clean the charging wire | |
| dirty. | (page 76). | |
|
|
|
98
