Appendix C Control Panel Menu Functions
Menu Navigation Keys
The menus on the control panel allow you to test and change the configuration of the printer.
ONLINE key: Allows you to switch between normal operating mode and offline mode for menu configuration.
MENU/ENTER/ key: Starts the Test, Con- fig or Parallel Menu. Displays items further down the menu, and enters the displayed set- tings.
key: Displays the next item at the same menu level. If the item is a numeric value, it is incremented.
key: Displays an item at a higher menu level. This key also starts the Network Menu.
key: Displays the immediately previous item in the same menu level. If the item is a numeric value, it is decremented.
Menu Display Format
Menu options are shown in the bottom row of the display. Following is an example of navigation through the menu to the Timeout settings. Notice the top row of the display does not change.
Tray1: Letter ConfigMenu
Tray1: Letter Timeout
Top row: Paper tray and media size.
Bottom row: ConfigMenu. Use the
and | keys to select a menu. |
Top row: Paper tray and media size.
Bottom row: Timeout submenu. Press the ENTER key to enter the Timeout submenu.
Tray1: Letter Timeout = 300*
Top row: Paper tray and media size.
Bottom row: Timeout setting. Use the and keys to enter the setting. An * indicates the current setting.
To return menu settings to the default values, turn on the printer while holding down the CLEAR key for at least five seconds. After five seconds the printer settings will return to the default values.
119
