Cisco Systems C90 manual Video input matrix, About the matrix, Configure the video inputs

Models: C90

1 86
Download 86 pages 5.45 Kb
Page 80
Image 80

Cisco TelePresence System Codec C90 and Profile 65” Dual using C90

Contents

Introduction

Web interface

Advanced configuration

Password protection

Appendices

Administrator guide

Contact us

The video input matrix

The video input matrix is found at the rear side of the codec and illustrates the combinations in which the video inputs can be connected.

About the matrix

Only one video input source from each row can be active at any time. The basic setup connectors are marked in bold.

The numbers in the left column represents the Video Input Sources 1–5. The main connectors, which are used in basic setup, are marked in orange color.

The Comp. 5 and S-Video (YC) 5 inputs uses the same physical connectors and can not be connected at the same time.

Video input matrix

Input Sources

Connector Name

 

 

 

 

 

 

1

1st Camera

HDMI 1

HD-SDI 1

YPrPb 1

2

2nd Camera

HDMI 2

HD-SDI 2

YPrPb 2

3

PC

HDMI 3

HD-SDI 3

DVI-I 3

4

 

HDMI 4

HD-SDI 4

5

 

DVI-I 5

Comp. 5

YC 5

Only one video input source from each row can be active at any time.

Configure the video inputs

Go to Advanced configuration (menu on screen or web interface) to configure the video inputs.

Navigate to Advanced configuration > Video > Input > Source [1–5] and configure the five video input sources.

Name: ““ (enter a name, and save)

Connector: <HDMI/HDSDI/DVI/YC/Composite/YPbPr> (each input source’s value space is a subset of this)

Quality: <Motion/Sharpness>

Navigate to Advanced configuration > Video. Configure the main video source and the default presentation source for the system. The values <1..5> represents the video input sources [1–5].

MainVideoSource: <1..5>

DefaultPresentationSource: <1..5>

Default configurations

Video Input Source 1 Name: “Main Camera“

Video Input Source 2 Name: “Secondary Camera“

Video Input Source 3 Name: “PC“

Video Input Source 4 Name: “DVD“

Video Input Source 5 Name: “Document Camera“

Video Input Source 1 Connector: HDMI

Video Input Source 2 Connector: HDMI

Video Input Source 3 Connector: DVI

Video Input Source 4 Connector: HDMI

Video Input Source 5 Connector: DVI

Video Input Source 1 Quality: Motion

Video Input Source 2 Quality: Motion

Video Input Source 3 Quality: Sharpness

Video Input Source 4 Quality: Motion

Video Input Source 5 Quality: Sharpness

Video MainVideoSource: 1 (which is the main camera)

Video DefaultPresentationSource: 3 (which is the PC)

D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011.

80

www.cisco.com

Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.

Page 80
Image 80
Cisco Systems C90 manual Video input matrix, About the matrix, Configure the video inputs, Default configurations