Cisco TelePresence System Codec C90 and Profile 65” Dual using C90
Contents | Introduction | Web interface | Advanced configuration | Password protection | Appendices |
Administrator guide
Contact us
Making a snapshot
When administering the video system from a remote location, you can use the web interface snapshot feature to check the view of the main video input source.
This feature is disabled by default. The feature can be enabled only when you have direct access to the codec, i.e. from the on screen menu or by using the command line interface via the codec serial data port.
Using the on screen menu
From the Advanced configuration menu, navigate to Video > AllowWebSnapshots and select On to enable the snapshot feature.
Using the command line interface
Enter the following command to enable the snapshot feature:
Video AllowWebSnapshots <Off/On>.
The Snapshot page
Make a snapshot
1.Press Get snapshot. The snapshot will be displayed on the web interface.
D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011. | 15 | www.cisco.com |
Copyright © |
