Cisco TelePresence System Codec C90 and Profile 65” Dual using C90
Contents | Introduction | Web interface | Advanced configuration | Password protection | Appendices |
Administrator guide
Contact us
Experimental
CustomSoftbuttons State [1..2] Softbutton [1..5] Type
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <NotSet/MainSource/PresentationSource/CameraPreset/Actions/ SpeedDial>
Example: Experimental CustomSoftbuttons State 1 Softbutton 1 Type: NotSet
Experimental
CustomSoftbuttons State [1..2] Softbutton [1..5] Value
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <S: 0, 255>
Example: Experimental CustomSoftbuttons State 1 Softbutton 1 Value: ""
Experimental
SystemUnit Controller Address
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <S: 0, 255>
Example: Experimental SystemUnit Controller Address: ""
Experimental
Conference [1..1] PacketLossResilience ForwardErrorCorrection
Experimental
Conference [1..1] PacketLossResilience RateAdaption
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Will use the a RateAdaption algorithm adapted to the PacketLossResilience mechanism. Default value is On.
On: RateAdaption will be used as part of the PacketLossResilience mechanism.
Off: RateAdaption will NOT be used as part of the PacketLossResilience mechanism.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental Conference 1 PacketLossResilience RateAdaption: On
Experimental
SoftwareUpgrade Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <Auto/Manual>
Example: Experimental SoftwareUpgrade Mode: Auto
Experimental
SoftwareUpgrade ServerAddress
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <S: 0, 255>
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Will enable ForwardErrorCorrection (RFC5109) mechanism as part of the PacketLossResilience mechanism. Default value is On.
On: Forward error correction will be used as part of the PacketLossResilience mechanism.
Off: Forward error correction will NOT be used as part of the PacketLossResilience mechanism.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental Conference 1 PacketLossResilience
ForwardErrorCorrection: On
Example: Experimental SoftwareUpgrade ServerAddress: "http://csupdate. tandberg.com/getswlist.py"
Experimental
CapsetFilter
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <S: 0, 100>
Example: Experimental CapsetFilter: ""
D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011. | 67 | www.cisco.com |
Copyright © |
