Cisco TelePresence System Codec C90 and Profile 65” Dual using C90
Contents | Introduction | Web interface | Advanced configuration | Password protection | Appendices |
Administrator guide
Contact us
Experimental
NetworkServices UPnP Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental NetworkServices UPnP Mode: Off
Experimental
NetworkServices UPnP Timeout
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <0..3600>
Example: Experimental NetworkServices UPnP Timeout: 0
Experimental
Audio Input Microphone [1..8] EchoControl
HighPassFilter
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental Audio Input Microphone 1 EchoControl HighPassFilter:
Off
Experimental
Audio Input Microphone [1..8] Channel
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Define whether the microphone connector is a mono signal or part of a multichannel signal.
Requires user role: ADMIN
Value space: <Left/Right/Mono>
Left: The microphone signal is the left channel of a stereo signal.
Right: The microphone signal is the right channel of a stereo signal.
Mono: The microphone signal is a mono signal.
Example: Experimental Audio Input Microphone 1 Channel: Mono
Experimental
Audio MicrophoneReinforcement Gain
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Microphone reinforcement is local amplification of one or several input connectors, directly to one or several output connectors, with minimum delay.
For software version TC4.0: Microphone reinforcement should not be enabled on a codec that is also configured using the Audio Console application.
This setting configures the gain of this path, from
Requires user role: ADMIN
Value space:
Example: Experimental Audio MicrophoneReinforcement Gain:
Experimental
Audio MicrophoneReinforcement AGC
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Microphone reinforcement is local amplification of one or several input connectors, directly to one or several output connectors, with minimum delay.
For software version TC4.0: Microphone reinforcement should not be enabled on a codec that is also configured using the Audio Console application.
This setting controls an AGC on the mix of all input connectors attached to the Microphone reinforcement.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental Audio MicrophoneReinforcement AGC: Off
Experimental
Audio MicrophoneReinforcement Input Microphone [1..8] Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Microphone reinforcement is local amplification of one or several input connectors, directly to one or several output connectors, with minimum delay.
For software version TC4.0: Microphone reinforcement should not be enabled on a codec that is also configured using the Audio Console application.
Configuring this setting to On for a microphone, means to attach it to the microphone reinforcement for local amplification. This is done in parallel to the microphone's existing connections, and will not affect any of these.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental Audio MicrophoneReinforcement Input Microphone 1 Mode:
On
D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011. | 68 | www.cisco.com |
Copyright © |
