Cisco TelePresence System Codec C90 and Profile 65” Dual using C90
Contents | Introduction | Web interface | Advanced configuration | Password protection | Appendices |
Administrator guide
Contact us
User management,
continued...
If you have ADMIN rights you can manage users as described on this page.
About password and PIN-code
The password is used to access the web interface and the command line interfaces (SSH, Telnet and serial port), while the PIN is used to access the on screen menus.
The Users page
Create a new user account
1.Press Create new user.
2.Fill in the Username, Password and PIN code, and select the user role(s) for this user account. As a default the user have to change the password and PIN code when signing in for the first time.
3.Set the Status to Active to activate the user.
4.Press Save to save the changes.
Edit user details
1.Select the name of an existing user to open the Editing user window.
2.Edit the details.
3.Press Save to save the changes or Cancel to go back one step without storing the information.
Deactivate a user account
1.Select the name of an existing user to open the Editing user window.
2.Set the Status to Inactive.
3.Press Save to save the changes.
Delete a user account
1.Select the name of the user to open the Editing user window.
2.Press Delete.
CAUTION: Do never delete all users with ADMIN rights.
D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011. | 17 | www.cisco.com |
Copyright © |
