Chapter 2 Setting Up Your Printer

Temperature

Make sure the temperature in the printer location stays constant. Keep the printer away from direct sunlight. For best printer operation, install the printer in a location where the temperature levels stay within the following ranges:

 

Fahrenheit

Celsius

Recommended range: 63.5º to 80.6º

17.5º to 27º

Permitted range:

50º to 90.5º

10º to 32.5º

Humidity

Excessive changes in humidity can cause unwanted condensation inside the printer. For best printer operation, install the printer in a location where humidity levels stay within the following ranges:

Recommended range:

50% to 70%

Permitted range:

20% to 80%

Power Source

Each printer model requires different types of electrical power, as shown below. If you need additional information about the power requirements, contact your dealer or a Tally Service Technician.

Warning! Use properly grounded wall sockets. Do not use converter plugs.

Caution! Use surge protection between the power source and the printer.

Model T8006e

Part Number: 043302

Voltage

120 VAC + 10%

Frequency

60 Hz + 2 Hz

Consumption

Up to 1,350 W

Model T8006e

Part Number: 043300

Voltage

220 VAC to 240 VAC

Frequency

50 - 60 Hz + 2 Hz

Consumption

Up to 1,350 W

7

Page 15
Image 15
Tally Genicom T8006e manual Temperature, Humidity, Power Source