Figure 3: Single Charger

LI72 Charger

Charger Jack

Charging the Battery

LI 72 Single Battery Charger

Refer to Figure 3. Your battery charger may look slightly different from the ones illustrated.

1.Install the battery in the printer and plug the Charger into the appropriate A.C. wall receptacle. Then insert the charge cable into the battery charger jack.

2.The charger LED will indicate the status of the charger as follows:

•A steady light indicates the battery is undergoing a fast charge.

•A slow blinking light indicates the charger is in trickle mode. The battery is ready for use.

•A rapidly blinking light indicates a problem with the battery. The battery may have an internal short, or its charge monitoring circuitry may be malfunctioning. The battery should not be used any further.

•Battery Packs may be charged either when installed in the

printer or when removed.

Do not attempt to charge batteries with the LI 72 while printing. Attempting to print while charging can result in improperly charged batteries.

12

QL Series User Guide