EDGE Tech QL Series manual 42

Desk Stand

Hook Belt Clip over the Stand

Desk Stand

Figure 16: Optional Desk Stand

Refer to Figure 16. To use the Desk Stand: Slide the printer onto the Desk stand as shown. The printer’s belt clip will hook onto the Desk Stand as shown and retain it in place. Ensure that the clip is securely attached to the Stand and the media compartment of the printer is seated securely in the stand.

Refer to the Specifications section for Desk Stand part numbers.

Holes are provided to permanently attach the Desk Stand to the work surface. The charger and data I/O cables may be plugged into the printer in the usual man- ner.

Refer to the section on using the chargers for more information.

42

QL Series User Guide