Using the Accessories
Belt Clip
Refer to Figure 14. All QL se-
ries printers are equipped with a belt clip as standard. To use: hook the clip over your belt, and ensure that the clip is securely attached to the belt. The belt clip will pivot to allow you to move freely while wearing the printer.
Clip printer to belt
Printer can pivot freely
Figure 14: The QL 420 Belt Clip
Kickstand
Refer to Figure 15 . The Kickstand option allows users to use the printer on a desktop. To use the optional Kickstand: Flip
the Kickstand on the
back of the printer
open until you feel a
slight detent. The
printer will now sit at
approximately a 30º
to 45° angle on a
desktop depending on the printer model.
Figure 15: The QL 420 Kickstand
continued
41
QL Series User Guide