There are 4 types of technical information:
General: Displays basic information about this access point, such as SSID, MAC Address, authentication / encryption type, channel etc.
WPS: If this access point supports WPS
CCX: If this access point supports CCX (Cisco Compatible eXtension), related information will be displayed here.
802.11n: If this access point complies with 802.11n draft, related information will be displayed here.
And here are descriptions of every setup item in setup area:
Item Name | Description | |
Sorted by >> | You can decide how to sort all listed access point by ‘SSID’, | |
‘Channel’, or ‘Signal’ (signal strength). | ||
| ||
Show dBm | Check this box to show the signal strength of access point, | |
instead of percentage. | ||
| ||
| Click this button to rescan access points. You can click this | |
Rescan | button for several times, if the access point you wish to use does | |
| not show in the list. | |
| You can store a specific access point to profile, so you can link | |
| to that access point directly next time, without inputting | |
| authentication key again. | |
Add to Profile |
| |
| To add an access point to profile, you have to select an access | |
| point from the list first, then click ‘Add to Profile’ button. Detailed | |
| instructions will be given below. | |
| Connect to a selected access point. You have to select an | |
Connect | access point from the list first and then click ‘Connect’ to connect | |
| to the selected access point. |
17
