To set 802.1x authentication for the access point. Please click ‘802.1X’ tab:
Here are descriptions of every setup item:
Item Name | Description |
| Select 802.1x EAP method from dropdown menu. Please ask the |
EAP Method | administrator of the access point you wish to connect to select a |
| correct EAP method. |
| Select 802.1x tunnel authentication type from dropdown menu. |
| Please ask the administrator of the access point you wish to connect |
| to select a correct tunnel authentication method. This pull down |
| menu is only available when authentication type you use is 'PEAP', |
| ‘TLS / Smart Card', or 'TTLS'. |
| When you use |
| setting is always 'Generic Token Card' and can not be changed. You |
| also need to select ‘Soft Token’ or ‘Static Password’ as password in |
Tunnel | ‘ID \ Password’ setting. |
| |
Authentication | ’EAP Fast’ authentication type also have a |
|
If you need to use protected authentication credential, check ‘Use protected authentication credential’ box, and click ‘Import’ to
26
