will be selected automatically, and please do not change it.
If you select ‘LEAP’, you’ll be prompted to input LEAD specific settings:
| Please input LEAP identity, password, domain name, and select | |
| encryption type. You can check ‘Show Password’ box so the | |
| password you inputted will be displayed as you type, but not replace | |
| by asterisk. | |
| Select the encryption type of the wireless access point or wireless | |
Encryption | device you wish to connect. When you’re adding a profile from an | |
existing access point or wireless device, the encryption type will be | ||
| ||
| selected automatically, and please do not modify it. | |
WPA | Input WPA preshared key here. If encryption is not enabled, or you | |
Preshared | select ‘WEP’ as encryption type, this field will be disabled and | |
Key | grayed out. | |
| You can select key type (Hexadecimal or ASCII) and input WEP key | |
| here. If encryption is not enabled, or you select ‘WPA’ as encryption | |
| type, this field will be disabled and grayed out. You can set up to 4 | |
| WEP keys here. | |
| There are two types of WEP key: Hexadecimal and ASCII. For | |
WEP Key | Hexadecimal key, you can input number | |
| example, ‘001122aabbcc’; For ASCII key, you can input number | |
| and alphabet | |
| The length of WEP key depends on the type of WEP key you | |
| selected. You can input 10 or 26 hexadecimal characters and 5 or 13 | |
| ASCII characters as WEP key. | |
Show | Check this box and all passphrases or security keys you inputted will | |
Password | be displayed as you type, but not replace your input with asterisk. | |
| If the access point you wish to connect requires 802.1x | |
Use 802.1x | authentication, please click on ‘Use 802.1x’ box, then click ‘802.1X’ | |
| tab to set 802.1x parameters. | |
| 25 |
