| load .pac credential file; to remove a loaded credential file, click | |
| ‘Remove’. | |
Session | You can enable or disable session resumption here. If you don’t | |
know if you should enable session resumption or not, please ask | ||
Resumption | ||
your 802.1x authentication administrator. | ||
| ||
ID \ Password | Input 802.1x username (ID) and password and other information if it | |
is required here. Click ‘Show Password’ to show the password you | ||
tab | typed. | |
| ||
Client | Use this tab to select a local certificate from dropdown menu. If the | |
access point you wish to connect required a specific client | ||
Certification | ||
certificate, the certificate must be installed on your computer, and | ||
tab | ||
you can select the certificate here. | ||
| ||
| Use this tab to use | |
| (Certificate Authority) from dropdown menu. If intermediate | |
| certificates are allowed, please select ‘Allow intermediate | |
Server | certificates’. Also, if you need to specify CA server’s name, you can | |
Certification | specify it in ‘Server name’ field. You can select ‘Server name must | |
tab | match’, so the CA server’s name must be the same with the value | |
| you set in ‘Server name’ field; If only the domain name part of full | |
| server name must the same with the value you set in ‘Server name’ | |
| field, select ‘Domain name must end in specified name’. |
After you complete all information related to the access point, click ‘OK’ to save the profile, or click ‘cancel’ to cancel adding a new profile.
If the profile is created, you will see the information in the Profile List.
27
