| 0: FCC (US, Canada, and other countries uses FCC radio | |
| communication standards) | |
| 1: ETSI (Europe) | |
| 2: SPAIN | |
| 3: FRANCE | |
| 4: MKK | |
| 5: MKKI (TELEC) | |
| 6: ISERAL (Channel 3 to 9) | |
| 7: ISERAL (Channel 5 to 13) | |
| Please note that only change the country code if you | |
| are in different country. For example: when | |
| operating this product in US, only channels 1~11 can | |
| be operated. Selection of other channels is not | |
| permitted under FCC regulations. | |
No forwarding | Check this box and wireless clients will not be able to share data | |
among wireless | with each other. | |
clients |
| |
| Check this box and the SSID will not be broadcasted to the public. | |
Hide SSID | Your wireless clients must know the exact SSID to be able to | |
connect to your computer. This option is useful to enhance | ||
| ||
| security level. | |
Allow BW 40 MHz | Check this box to allow BW 40MHz capability. | |
TX BURST | Check this box to accelerate the data transmit rate. It may not | |
work with all wireless access point and wireless devices. | ||
| ||
| You can define the time interval that a beacon signal should be | |
Beacon(ms) | send. Default value is 100. Do not modify this value unless you | |
| know what will be affected. | |
| You can select the wireless output power here. Please select a | |
TX Power | proper output power setting according to your actual needs. You | |
may not need 100% of output power if other wireless clients are | ||
| ||
| not far from you. | |
| Select the idle time for the wireless access point. Default value is | |
Idle Time | 300. Do not modify this value unless you know what will be | |
| affected. |
To save changes, click ‘Apply button. Or you can click ‘Default’ to reset all values to factory default value.
54
