Parameters | Default | Description |
Mode |
| It allows you to set the AP to AP, Station, |
|
| Bridge or WDS mode. |
Band |
| It allows you to set the AP fix at 802.11b or |
|
| 802.11g mode. You also can select B+G |
|
| mode to allow the AP select 802.11b and |
|
| 802.11g connection automatically. |
ESSID | default | This is the name of the wireless LAN. All the |
|
| devices in the same wireless LAN should |
|
| have the same ESSID. |
Channel Number 11 | The channel used by the wireless LAN. All | |
|
| devices in the same wireless LAN should use |
|
| the same channel. |
Associated Clients | Click “Show Active Clients” button, then an | |
|
| “Active Wireless Client Table” will pop up. You |
|
| can see the status of all active wireless stations |
|
| that are connecting to the access point. |
WLAN MAC |
| This is the MAC address used by the Wireless |
|
| interface of this AP when it is in the station |
|
| modes. |
|
| 39 |
