EFJohnson 8500 manual Display Information

DISPLAY INFORMATION

tion appears when system or group scanning if any group has been locked out of the scan list.

MUTE - Indicates that the key press tone has been muted by turning power on with the SCN key pressed. To re-enable this tone, turn power on again with the SCN key pressed.

TX - Indicates that the transmitter is on. This indication appears in conjunction with the red transmit indicator next to the antenna.

BUSY - Indicates that the channel is busy when a conventional system is selected.

MON - When a conventional system is selected, indicates that the monitor mode has been enabled by pressing the Auxiliary switch on the side. This disables Call Guard® squelch so that all messages are heard. Press the Auxiliary switch again to disable monitoring.

PHON - Indicates that the phone mode has been selected by pressing the PHON or SND key (telephone keypad models only).

- Indicates that the displayed group is programmed for telephone calls.

- Indicates that the battery needs recharging.

- Indicates that there are overflow digits because the telephone number is longer than 7 digits. To momentarily display the overflow digits, press RCL 0.

Alphanumeric Display - In the standard (non-phone) mode, this display indicates either the 7-character system identification or the 5-character group identification. Programming determines which is displayed, and the group identification is available on Multi-Net systems only. In the phone mode, this display indicates the telephone number. Operating modes and error conditions may also be indicated by this display as described in “Display Messages” on page 38.

13