Setting up the Projector Network Environment

3.Setting up a Network Connection for the Projector

Settings for such items as the projector’s IP address and subnet mask are compatible with the existing network.

Set each item on the projector as follows. (See page 89 of the projector owner’s manual for setting.)

DHCP Client : OFF

IP Address : 192.168.150.002

Subnet Mask : 255.255.255.000

1 Start Internet Explorer (version

5.0or later) on the computer, and enter “http://192.168.150.2/” in “Address”, and then press the “Enter” key.

2 If a user name and a password have not yet been set, just click the “OK” button.

•If a user name and a password have been set, input the user name and the password, and click the “OK” button.

•If the user name or password is entered

incorrectly three times, an error message will be displayed.

3 When the screen as shown on the right appears, click “TCP/IP”.

21