Setting the Projector Using RS-232C or Telnet
When Connecting Using Telnet1 Click“start”from theWindows® desk- top and select “Run”.

2 Enter“telnet 192.168.150.2”in the text box that opens up. (If the IP address of the projector is 192.168.150.2.)

3 Click the “OK” button.4 “User Name:” is displayed. Input the user name and press the “Enter” key.

∑If a user name has not yet been set, just press the “Enter” key.

5 “Password:” is displayed. Input the password and press the“Enter”key.

∑If a password has not yet been set, just press the “Enter” key.

▼SETUP MENU

---------------------------------

SETUP MENU--------------------------------

 

 

[1]IP Address

[2]Subnet Mask

[3]Default Gateway

[4]User Name

[5]Password

 

[6]RS-232C Baud Rate

[7]Projector Name

[8]DHCP Client

[A]Advanced Setup

 

[D]Disconnect All

[V]View All Setting

[S]Save & Quit

[Q]Quit Unchanged

setup>

 

 

 

 

 

Note

∑If the IP address has been changed, be sure to enter the new IP address in step 2.

∑User name and password are not set in the fac- tory default settings.

∑If the user name or password is entered incor- rectly three times in steps 4 or 5, SETUP MENU will be quit.

6 Input “setup” and press the “Enter” key.

∑SETUP MENU will be displayed.

29