Controlling the Projector Using
Carrying out Network Ping Test
(ADVANCED[5]Network Ping Test)
It is possible to confirm that a network connection between the projector and a computer etc. is working normally.
advanced>5 |
|
|
|
| 1 | ||
Ping dest IP addr | :192.168.150.1 |
|
|
|
| ||
Please Enter |
| :192.168.150.152 |
|
|
| 2 | |
|
|
| |||||
(change) | 192.168.150.152 |
|
|
| *1 | ||
|
|
| |||||
32 bytes from 192.168.150.152: icmp_seq = 1, time = 0 ms |
|
| |||||
32 bytes from 192.168.150.152: icmp_seq = 2, time = 0 ms | *2 | ||||||
32 bytes from 192.168.150.152: icmp_seq = 3, time = 0 ms | |||||||
|
| ||||||
32 bytes from 192.168.150.152: icmp_seq = 4, time = 0 ms |
|
| |||||
|
|
|
|
|
|
| |
1Enter “5” and press the “Enter” key.
2Enter IP address of device to be tested and press the “Enter” key.
Display entered IP address (*1). Display test result (*2).
Note
∑If the “Enter” key is pressed without entering an IP address, the Ping destination IP address used previously is entered.
∑If there is a fault with the connection, “Error: No answer” is displayed after a 5 second retry. In this case, please confirm the settings for the projector and the computer, and contact your network ad- ministrator.
Setting of Accept IP Address
Addr(1) - [8]Accept IP Addr(3))
It is possible to improve security of the projector by allowing connection from only a prescribed IP ad- dress. It is possible to set up to three IP addresses allowing connection to the projector.
advanced>6 |
|
|
| 1 | |
Accept IP Addr(1) | : 0.0.0.0 |
|
|
| |
Please Enter |
| : 192.168.150.152 |
|
| 2 |
|
|
| |||
(change) | 192.168.150.152 |
| * | ||
1Enter “6”, “7” or “8” and press the “Enter” key.
2 Enter numerical value and press the“Enter”key. Display set numerical value (*).
Note
∑To invalidate the Accept IP Addr being currently set, enter “0.0.0.0”.
∑If there is one or more Accept IP Addr being set, no connections are allowed from IP addresses that are not yet set. They can be cancelled using [9]Accept All IP Addr.
Accepting All IP Addresses
(ADVANCED[9]Accept All IP Addr)
Removes IP addresses set with “Accept IP Addr”.
advanced>9 | 1 |
Accept All IP Addresses(y/n)? y | 2 |
1Enter “9” and press the “Enter” key.
2 Enter “y” and press the “Enter” key.
Note
∑At the point in time where “y” was entered, the numerical values for Accept IP
∑If “n” is entered, setting is not altered.
36