Controlling the Projector Using RS-232C or Telnet

The setting procedure for each item will be explained. For the basic procedure, please refer to “Set Items” on page 31.

IP Address Setting([1]IP Address)

Setting of IP address.

setup>1

 

 

 

1

IP Address

 

:192.168.150.2

 

 

 

Please Enter

:192.168.150.3

 

 

2

 

 

(change)

—>

192.168.150.3

 

*

Default Gateway Setting([3]Default Gateway)

Setting default gateway.

setup>3

 

 

1

note: “0.0.0.0” means “Using no default gateway.”

 

 

Gateway Address :0.0.0.0

 

 

Please Enter

:192.168.150.1

 

 

2

 

 

(change)

—> 192.168.150.1

*

1Enter “1” and press the “Enter” key.

2Enter numerical value to be set and press the “Enter” key.

Display IP address after change (*).

1Enter “3” and press the “Enter” key.

2Enter numerical value to be set and press the “Enter” key.

Display gateway address after change (*).

Subnet Mask Setting([2]Subnet Mask)

Setting subnet mask.

setup>2

 

 

1

Subnet Mask

:255.255.255.0

 

2

Please Enter

:255.0.0.0

 

 

 

 

(change) —>

255.0.0.0

 

*

1Enter “2” and press the “Enter” key.

2Enter numerical value to be set and press the “Enter” key.

Display subnet mask after change (*).

Note

•If the values for IP Address, Subnet Mask or Gate- way of the projector have been changed via Telnet, the computer cannot be connected to the projector depending on the computer’s network settings.

User Name Setting([4]User Name)

Carrying out security protection using user name.

setup>4

 

 

1

User Name

:

 

 

 

Please Enter

: XX-XXXX

 

 

2

 

 

(change)

—> XX-XXXX

*

1Enter “4” and press the “Enter” key.

2Enter user name and press the “Enter” key. Display set user name (*).

Note

•User name can be up to 8 characters.

•You can input the characters below : a-z, A-Z, 0-9, -, _

•In the default state, user name is not set.

33