Controlling the Projector Using
It is possible to disconnect all the TCP/IP connections currently recognized by the projector. Even if the COM Redirect port is fixed in the Busy status due to a problem, it is possible to force the Ready status back by carrying out this disconnection.
setup>d | 1 |
Disconnect All Connections(y/n)?y | 2 |
Now Disconnecting... |
|
|
|
1Enter “d” and press the “Enter” key.
2 Enter “y” and press the “Enter” key.
Note
•If Disconnect All is performed, the connection to the projector via network will be forcibly discon- nected.
If there is no input after a fixed time, the projector automatically disconnects network connection using the Auto Logout function. It is possible to set the time until the projector is automatically disconnected in units of a minute (from 1 to 65535 minutes).
advanced>1 |
|
| 1 | |
Valid range | : 0 to 65535 (minute) |
|
| |
note: if you enter “0”, auto logout function will be disable. |
|
| ||
Auto Logout Time : 5 |
|
| ||
Please Enter | :15 |
|
| 2 |
|
| |||
(change) | * |
1Enter “1” and press the “Enter” key.
2Enter numerical value and press the“Enter”key. Display set numerical value (*).
Note
•If the set value is made 0, the Auto Logout func- tion is disabled.
•If an invalid number is entered, an error message (“Parameter Error!”) will be displayed and the screen returns to the ADVANCED SETUP MENU.
Enters ADVANCED SETUP MENU.
Setting of TCP port number. It is possible to set in the range of 1025 to 65535.
|
|
|
| advanced>2 |
|
|
| 1 | |
setup>a |
| 1 |
|
|
| ||||
|
| Valid range |
| :1025 to 65535 |
|
| |||
******************** ADVANCED SETUP MENU *********************** |
|
|
|
|
| ||||
|
| Data Port |
| :10002 |
|
|
| ||
[1]Auto Logout Time | [2]Data Port |
|
|
|
|
|
| ||
|
| Please Enter |
| :10005 |
|
| 2 | ||
[5]Network Ping Test |
|
|
|
|
|
| |||
|
|
| (change) | 10005 |
| * | |||
[6]Accept IP Addr(1) | [7]Accept IP Addr(2) [8]Accept IP Addr(3) |
|
|
| |||||
[9]Accept All IP Addr | [0]Search Port |
| 1 Enter “2” and press the “Enter” key. |
|
| ||||
|
|
|
|
| |||||
[!]Restore Default Setting |
| 2 Enter numerical value and press the“Enter”key. | |||||||
|
| Display set numerical value (*). |
|
| |||||
[Q]Return to Main Menu |
|
|
|
| |||||
|
|
|
|
|
|
|
| ||
advanced> |
|
|
| Note |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
1 Enter “a” and press the “Enter” key.
•Set according to need. Normally, use with the factory default setting.
35