Resetting the Lamp Timer of the Projector via LAN

When the projector is connected to a network, you can use HyperTerminal or a similar communications program to send a command to reset the lamp timer. The example below uses Windows® XP as the operating system.

1 Click “Start” – “All Programs” – “Accessories” – “Communica- tions” – “HyperTerminal”.

•If you do not have HyperTerminal in- stalled, see the owner’s manual of your computer.

•Depending on the settings of your com- puter, you may be required to enter your area code and other details. Enter the information as required.

2

3

4

Enter a name in the “Name” field, and click “OK”.If you are required to enter the area code, enter it in the “Areacode” field. From the “Connectusing” drop-down menu, select“TCP/IP (Winsock)”, and click“OK”.

Enter the IP address of the projector in the “Host address” field (see “TCP/IP” on the “Network” menu of the projector), and enter the data port of the projector in the “Port number” field (“10002” is the factory default setting), and click “OK”.

Select

“TCP/IP (Winsock)”

50