Eiki EIP-WX5000L Setting up the Screen, Standard Setup Front Projection, Side View, Top View

Lower lens shift position

(High mount setup)

Setting up the Screen

For optimal image quality, position the projector perpendicular to the screen with the projector’s feet flat and level. Doing so will eliminate the need for Keystone correction and provide the best image quality.

Note

•The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.

•For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

Standard Setup (Front Projection)

■ Place the projector at the required distance from the screen according to the desired picture size.

Example of standard setup

Side View

Lens center

H1	Screen
	Center of screen

Lens center

H2

Upper lens shift

Lposition (Desktop setup)

•The distance from the screen to the projector may vary depending on the size of the screen.

•The default setting can be used, when placing the projector in front of the screen. If the projected im- age is reversed, readjust the set- ting to “Front” in the “PRJ Mode” menu. (See page 62 on the owner’s manual of the projector.)

Top View
Screen
W	Lens center
	Center of screen
	Lens center

•Place the projector so that an imaginary horizontal line that passes through the center of the

lens is perpendicular to the screen.

Leftmost lens shift position

Rightmost lens shift position

2