Eiki EIP-WX5000 SETUP MENU Main Menu, Advanced Setup Menu, 2Subnet Mask Factory default setting

Setting the Projector Using RS-232C or Telnet

SETUP MENU (Main Menu) ADVANCED SETUP MENU

▼SETUP MENU

---------------------------------	SETUP MENU--------------------------------
[1]IP Address	[2]Subnet Mask	[3]Default Gateway
[4]User Name	[5]Password
[6]RS-232C Baud Rate	[7]Projector Name	[8]DHCP Client
[A]Advanced Setup		[D]Disconnect All
[V]View All Setting	[S]Save & Quit	[Q]Quit Unchanged
setup>

[1]IP Address (Factory default setting : 192.168.150.2)

IP address settings. (Page 36)

▼ADVANCED SETUP MENU

******************** ADVANCED SETUP MENU ***********************

[1]Auto Logout Time	[2]Data Port
[5]Network Ping Test
[6]Accept IP Addr(1)	[7]Accept IP Addr(2) [8]Accept IP Addr(3)
[9]Accept All IP Addr	[0]Search Port

[!]Restore Default Setting [Q]Return to Main Menu

advanced>

[2]Subnet Mask (Factory default setting : 255.255.255.0)

Subnet mask settings. (Page 36)

[3]Default Gateway (Factory default setting : Not Used)

Default gateway settings. (Page 36)

[4]User Name (Factory default setting : Not Re- quired)

Setting of user name for security protection. (Page 36)

[5]Password (Factory default setting : Not Required)

Setting of password for security protection. (Page 37)

[6]RS-232C Baud Rate (Factory default setting : 9600 bps)

Baud rate settings for the RS-232C terminals. (Page

37)

[7]Projector Name

It is possible to assign a projector name. (Page 37)

[8]DHCP Client

DHCP Client settings. (Page 37)

[A]Advanced Setup

Enters ADVANCED SETUP MENU. (Page 38)

[D]Disconnect All

Disconnect all connections. (Page 38)

[V]View All Setting

Displays all setting values. (Page 34)

Can also be used with ADVANCED SETUP MENU.

[S]Save & Quit

Save set values and quit menu. (Page 35)

[Q]Quit Unchanged

Quit menu without saving setting values. (Page 35)

[1]Auto LogoutTime (Factory default setting : 5 min- utes)

Setting of time until automatic disconnection of net- work connection. (Page 38)

[2]Data Port (Factory default setting : 10002)

Setting the TCP port number used when exchang- ing data. (Page 38)

[5]Network Ping Test

It is possible to confirm that a network connection between the projector and a computer etc. is work- ing normally. (Page 39)

[6]Accept IP Addr(1) [7]Accept IP Addr(2) [8]Accept IP Addr(3)

[9]Accept All IP Addr (Factory default setting : Ac- cept All)

For improved security, it is possible to set up to three IP addresses allowing connection to the projector. Set IP addresses can be cancelled using [9] Accept All IP Addr. (Page 39)

[0] Search Port (Factory default setting : 9300)

Setting the port number used when searching for the projector. (Page 40)

[!]Restore Default Setting

Restores all setting values that can be set using the

menu to the default state. (Page 40)

[Q]Return to Main Menu

Return to the main SETUP MENU. (Page 40)

Note

•The factory default settings (“DHCP Client” is set to “OFF” on the projector) are as follows:

IP address : 192.168.150.002

Subnet mask : 255.255.255.000

Default gateway : 000.000.000.000

33