Eiki EIP-WX5000L Confirming the Projector, Controlling the Projector, Status Status

Confirming the Projector

Status (Status)

Controlling the Projector via LAN

Controlling the Projector

(Control)

On this screen, you can confirm the projector status. You can confirm the following items :

•MAC Address

•Power

•Condition

•Lamp Timer 1

•Lamp Timer 2

•Lamp Life 1

•Lamp Life 2

•Input

•Signal Info

•Serial Number

Note

•If you click the “Refresh” button before the screen is displayed completely, an error message (“Server Busy Error”) will be dis- played. Wait for a moment and then oper- ate again.

•For details about each item, refer to the owner’s manual of the projector.

On this screen, you can perform projector con- trol. You can control the following items :

•Power

•Input Select

•Volume

•Mute (Audio)

•Shutter

Note

•If you click the “Refresh” button before the screen is displayed completely, an error mes- sage (“Server Busy Error”) will be displayed. Wait for a moment and then operate again.

•You cannot operate this page while the pro- jector is warming up.

•While the projector is in standby mode, you can only control “Power ON”.

•For details about each item, refer to the owner’s manual of the projector.

27