Computer Input
Screen Size Adjustment
This projector has a picture screen resize function, which enables you to display the desirable image size.
1 | Press MENU button to display the |
| Point 7 8 buttons to move the red frame pointer to Screen |
| Menu icon. |
2 | Press Point d button to move the red frame pointer to the |
| function that you want to select. Then press SELECT button. |
Normal
Provides an image to fit screen size.
True
Provides image in its original size. When the original image size is larger than screen size ( 800 x 600 ), this projector enters “Digital zoom +” mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.
Digital zoom +
When Digital zoom + is selected, the
A projected image can be also expanded by pressing D.ZOOM e button on the remote control.
Digital zoom –
When Digital zoom – is selected, the
A projected image can be also compressed by pressing D.ZOOM ▼ button on the remote control.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM ed, SELECT and Point buttons.
Screen Menu
SCREEN MENU
Move the red frame to the function and press SELECT button.
Note:
–This Screen Menu cannot be operated when
“720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC System Menu. ( ☞ P23 ).
–True and Digital zoom +/– cannot be selected
when “480i ”, " 575i ", " 480p ", " 575p " is selected on PC System Menu (☞ P23 ).
–This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting projector.
–The image data in other than SVGA (800 x 600) is modified to fit the screen size in initial mode.
–The panning function may not operate properly if the computer system prepared on PC Adjust Menu is used.
29
