Eiki LC-SD10 owner manual Setting Menu

Setting

Setting Menu

1	Press MENU button to display the On-Screen Menu. Press
	Point 7 8 buttons to move the red-frame pointer to SETTING
	icon.
2	Press Point d button to move the red-frame pointer to the item
	that you want to set and then press SELECT button. Setting

dialog box appears.

Language

Language used in the On-Screen Menu is selectable from among English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean and Japanese.

Keystone

This function corrects the distorted image. Select either of Store or Reset and press SELECT button. The keystone dialog box will appear. ( ☞ P20 )

Store	Store the keystone adjustment data even if the AC
	power cord is disconnected.
Reset	Reset the keystone adjustment data when the AC
	power cord is disconnected from the AC outlet.

Blue back

When this function is “On,” the projector will project a blue image on the screen if any input signal is not detected.

Display

This function decides whether to display On-Screen Displays. On . . . . . .shows all the On-Screen Displays.

Off . . . . . .sets On-Screen Displays disappeared except;

•On-Screen Menu

•“Power off?” message ( ☞ P19 )

•P-TIMER ( ☞ P21)

•“No signal” message ( ☞ P37 )

•”Wait a moment!” message

Logo

This function decides what to be displayed on the starting display.

User	···· the image you captured
Default	···· the factory set logo
Off	···· count-down only

Capture

This function is used to capture the image being projected and use it for a starting-up display. After capturing the projected image, go to the Logo function (above) and set it as “User”. Then the captured image will be displayed when turning on the projector next time.

To capture the image, select [Yes]. To cancel the Capture function, select [No].

Before capturing an image, select Standard in the Image Select Menu to capture a proper image. ( ☞ P27, P33 )

A signal from a computer can be captured up to XGA(1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i. When capturing the image that has been adjusted by the Keystone function, the adjustment data is automatically reset and the projector captures an image without keystone adjustment.

SETTING MENU

Set the red frame	Setting Menu
pointer to the item
and press SELECT
button.

Press SELECT button at

Language to show the

Language Menu.

Capture

Select [Yes] to capture the projected image. Select [No] to cancel.

Select [Yes] to stop capturing.

36