Installation
Connecting to a Computer
Monitor Output | Audio Output | USB port |
VGA Cable | Audio Cable | USB |
| (Stereo) ✽ | Cable ✽ |
RESET |
|
|
| VIDEO | PORT |
| COMPUTER IN / |
| USB |
| COMPONENT IN/ | AUDIO IN | |
|
| |
| COMPUTER / | AV |
| COMPONENT |
|
Terminals of the Projector
If you wish to use Page ▲▼ buttons on the remote control, connect USB port of your computer to the USB socket of the projector. ( ☞ P10, P38 )
Note :
When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Cables used for connection
◆MAC ADAPTER (Not supplied)✽
A Macintosh adapter may be required when you use a Macintosh computer.
Set switches as shown in the |
| |
table below depending on RES- | ON | |
OLUTION MODE that you want | ||
ON DIP | ||
to use before you turn on pro- | 1 2 3 4 5 6 | |
jector and computer. | OFF | |
|
•VGA Cable ( HDB 15 pin )
•Audio Cable ( Mini Plug (stereo) ) ✽
•USB Cable ✽
•MAC Adapter ( For Macintosh ) ✽
✽Not supplied.
| 1 | 2 | 3 | 4 | 5 | 6 |
13" MODE (640 x 480) | ON | ON | OFF | OFF | OFF | OFF |
16" MODE (832 x 624) | OFF | ON | OFF | ON | OFF | OFF |
19" MODE (1024 x 768) | OFF | ON | ON | OFF | OFF | OFF |
21" MODE (1152 x 870) |
|
| ON | ON | OFF | OFF |
15
