Part Names and Functions
Remote Control
q
t r e w
y
u
@6
i
@5 o
!0
@4
@3
!1 
@2
!2 
@1
q
Act as the left mouse button for wireless mouse operation. (p.15)
wPOWER
Turn the projector on or off.
eWIRED REMOTE jack
Connect the remote control cable to this jack when using as a wired remote control. Wireless remote control does not work when the remote control cable is connected to the projector.
rSIGNAL EMISSION indicator
Lights red while the laser beam is being emitted from the laser light window or a signal is being sent from the remote control to the projector.
tLaser Light window
A laser beam is emitted from here (p.14).
yVIDEO button
Select the VIDEO input source. (p.40)
uCOMPUTER button
Select the COMPUTER input source.
iAUTO PC button
Automatically adjust the computer image to its optimum setting. (pp.28,33,47)
oKEYSTONE button
Correct keystone distortion. (pp.26, 48)
!0Point ed 7 8 ( VOLUME + / – ) buttons
– Select an item or adjust the value in the
– Pan the image in the Digital zoom + mode. (p.39)
– Adjust the volume level. (Point 7 8 buttons) (p.27) !1MENU button
Open or close the
Freeze the picture on the screen. (p.28) !3LASER button
– Operate the Laser pointer function. Laser beam is emitted while pressing this button within 1 minute. When using this laser pointer for more than 1 minute, release the LASER button and press it again. (p.14)
– Display the Pointer on the screen. (p.14) !4PAGE ed buttons
Scroll back and forth the pages on the screen when giving a presentation. To use these buttons, connect the projector and your computer with a USB cable. (pp.11, 19)
!5LAMP CONTROL button Select a lamp mode. (pp.28, 53)
!6D..ZOOM ed buttons
Zoom in and out the images. (pp.28, 39)
!3
!4
@0
!9
!7RESET/ON/ALL-OFF switch
When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for power saving when it is not used. Slide this switch to "RESET" to initialize the remote control code or switch Spotlight and Pointer to the Laser pointer function.
!5 
!8 !6
!7
To ensure safe operation, please observe the following precautions:
–Do not bend, drop, or expose the remote control to moisture or heat.
–For cleaning, use a soft dry cloth. Do not apply benzene, thinner, splay, or any chemical material.
!8IMAGE button
Select the image mode. (pp.29,36,43) !9MUTE button
Mute the sound. (p.27)
Operate the
Temporarily turn off the image on the screen. (p.29)
Act as the right mouse button for wireless mouse operation. (p.15) @3SELECT button
– Execute the selected item. (p.24)
– Expand or compress the image in Digital zoom mode. (p.39) @4PRESENTATION POINTER button
Move a pointer of the projector or a pointer for wireless mouse operation.
– Correct vertical keystone distortion and adjust the PC display parameters. (pp.26, 47)
– Display the image in SD card or return to the menu bar in Memory Viewer menu. Refer to the owner's manual of "Network
@6NETWORK button
Select the Network input or Memory viewer input. See owner's manual “Network
13
