Eiki LC-XWP2000 Maintenance and Troubleshooting, Indicators, Power, Lamp, Conditions, Green, Slow

Maintenance and Troubleshooting

Indicators

The Power and Lamp indicators show the status of the projector. Before requesting repair, check the projector status using the chart below. If the problem cannot be resolved contact your dealer.

Power	Lamp	Conditions	Notes
(Green)	(Red)
Slow	Off	Stand by	Projector is ready to be turned on (normal)
flashing		mode

On	Off	On mode	Projector is on and operating normally
On	Slow	Cool-down	Projector is in cool-down mode and will not
	flashing	mode	respond to user input (normal)

	Fast		Fan-fault	The projector has detected a problem with
On				an internal fan, the lamp will shut off
	flashing		mode
				automatically, contact your dealer
Fast			Lamp-cover	T h e l a m p c o v e r i s o p en o r t h e r e i s
		On		a problem with the lamp. If the lamp
flashing			open	door is closed and replacing the lamp
				does not correct the issue, contact your
				dealer.
				The projector has overheated and shut the
				lamp off. Correct the over temp condition
Fast	Fast		High	immediately.
				1. Check that the ventilation slots are free
flashing	flashing		temperature	from obstructions
				2. Check the cleanliness of the air filter.
				3. If the condition persists, contact your
				dealer
Slow	Slow		Lamp-fault	The lamp does not light., come back ”stand
flashing	flashing		mode	by mode”, and turn on the power button.

54