Eiki PJNET-300 owner manual Network PIN code setting, Displaying network PIN code menu

Chapter 2 Installation

Network PIN code setting

The network PIN code can be set to restrict access to the setting page of the projec- tor using the web browser.

✽Default network PIN code [0000] means no network PIN code is set.

1 Displaying network PIN code menu

Select network menu and then select "Network PIN code" sub menu. Press SELECT button twice to display the Network PIN code entry pallet.

* The number on the pallet is the current network PIN code.

Network PIN Code

2 Entering the network PIN code

To enter the network PIN code, use point but- tons (▲,▼,7,8) on the projector or the remote control.

3 Fixing the network PIN code

After entering a 4-digit number, select "SET" by using point buttons (7,8) and then press SELECT button.

The red frame moves sequentially left or right with 7 8 button.

The number up or down with d e button.

20

✐The screen 10-key pallet can be used for entering the network PIN code. See item "How to enter the numbers with the screen 10-key pallet" (☞. 21)

✐ It is recommended to set up the Network PIN code when you connect the projector to the network. This setting is carried out through the projector’s menu and also it can be set through the network using the web browser. For further information, refer to item "Initial Setting/Network PIN code setting" (☞ p.29).

✐ Valid characters for the network PIN code are only numbers 0 to 9. The number "0000" means no network PIN code is set.

✐ This network PIN code is not to restrict the use of the projector. This network PIN code is to set the security against the use of the projector through the network.