Eiki PJNET-300 Registering and deleting E-mail addresses, Option selection for sending alert mail

E-mail setting

2 Registering and deleting E-mail addresses

Click "Add e-mail address" and type the e-mail address onto the text box and click Set button. To check the registered addresses, click Check/Delete sub menu tab. The addresses are listed as the figure on the right.

✐Up to 10 E-mail addresses can be registered.

To delete the registered addresses, check the address you want to delete and click Delete button.

3 Option selection for sending alert mail

Click Option sub menu tab. Check the condition items under which alert mail will be sent and click Set button.

Please refer to item "Examples :Type and contents of alert mail" described on the next page.

Check / Delete

[1]–––––––––––––––––––––––––––––––––––

❏When PJ lamp is off.

❏When the life span of lamp is reached.

❏When internal PJ power circuit is failed.

❏When internal PJ temperature is too high.

❏When PJ is turned off with power ON/OFF button.

[2]–––––––––––––––––––––––––––––––––––

❏When Power management function turns PJ lamp off.

❏When the signal is interrupted.

[3]–––––––––––––––––––––––––––––––––––

❏ When lamp Corres. Value reaches [ ] hours. Attached message

Option

✐The length of message should be less	ENGLISH
than 256 characters.

✐Up to 99,999 hours can be set for use time.

33

OWNER'S MANUAL