Eiki PJNET-300 owner manual Q Why am I not receiving E-mail alert messages?

Q&A

QWhy am I not receiving E-mail alert messages?

AMake sure that the registered E-mail address and SMTP server address are correct. If the SMTP server is located in your LAN (Local Area network), the

address should be set to the SMTP server in your LAN. The SMTP server located outside of your LAN may not be available for security reason. For further informa- tion please contact your network administrator (☞ p.32).

It may be required for the authentication depending on the SMTP server. This product does not support this kind of SMTP server.

Others

QCan I develop a driver to control external serial equipment?

AThis product does not provide any driver software. To control the external equip- ment connected to the extra serial port, it should be required to clarify the

commands and communication condition defined by each equipment. If they are clarified, it can be controlled by using the Telnet application installed on your computer. Please see item "Use of telnet" (☞ p.66).

Q Can I control the projector by using the telnet application?

APossible. Please refer to the item "Control the projector with telnet" (☞ p.68).

ENGLISH

OWNER'S MANUAL

83