Eiki PJNET-300 owner manual Setting examples for the serial control, of the serial controller

Serial port setting

Setting examples for the serial control

Setting for controlling the equipment connected to the serial port from the computer.

Serial Control :Selects "External"

Port number :Sets according to the computer specified port no. Do not use port number 10000*2.

Other Settings :Sets according to the communication condition of the equipment

Setting for controlling the projector from the serial con- troller connected to the serial port.

Serial Control :Selects "Projector"

Port number :Not specified. Do not use port number 10000*2.

Other Settings :Sets according to the communication condition

of the serial controller

Setting for controlling the projector from the computer through the LAN port.

Serial Control	:Not specified
Port number	:Not specified
Other Settings	:Not specified

* The port number of the computer must be used with 10000.

*2 The reserved port numbers are http (80), ftp (21), SNMP (25), POP3 (110) etc. The port num- ber 10000 is reserved to control the projector through the LAN port.

✐Exclusive driver software for control of the external equipment is required. This product does not provide any driver software. Please consult your local dealer.

✐There are 2 types of RS-232C serial cable, Normal(Straight) and Reverse(Cross) type. Usually, when connecting between this product and a projector or a computer, use Reverse type of serial cable. When connecting DVD player etc., use Normal type.

OWNER'S MANUAL

ENGLISH

63