Power control and status check
About projector condition
Status | Description |
Normal | Projector is operating normally. |
Power management in operation | Power management is operating |
Lamp failure | Lamp failure is occurring |
Abnormal Temperature | The temperature of the projector became too high |
Cooling down after Abnormal Temp | Projector detects abnormal temp. and is cooling down itself. |
Standby after Abnormal Temp | Projector detects abnormal temp. and sets into standby mode. |
Power failure | Power failure has occurred inside the projector. Projector is turned |
| off. Disconnect the AC cord and ask servicing to a qualified service |
| personnel. |
| If the power failure occurs on the projector, "Power failure" is |
| indicated on the status column and the information icon appears |
| on the power column as shown below. Click this icon to display |
| further information of the power failure. |
| Click this icon to display |
| further information of |
| the power failure. |
When a security (PIN code lock) has been set on the projector, you also cannot con- trol it through the network. To control the projector through the network temporarily, execute "PJ lock suspend" command to unlock the security. "PJ lock suspend" is on setting sub menu [3] on Setting main menu. (☞p.48)
✐The projector cannot be turned on during the projector is on cooling down.
✐The web browser checks and updates the projector's condition every 30 seconds automatically.
OWNER'S MANUAL
ENGLISH
41
